Leading the world in rotary measurement since 1940
Leading the world in rotary measurement since 1940
+44 (0) 1225 426206


Specialist machines designed to optimise your inspection process.  Measures Roundness, Runout, Flatness, Parallelism, Eccentricity and Concentricity.  Designed specifically to be fully compatible with any shop floor environment whilst maintaining unrivalled accuracies.

GeoInspec capabilities deliver new levels of accuracy, flexibility and performance over a wide range of calibration and inspection applications.

High Precision Air Bearing

GeoInspec utilises very high accuracy air lubricated hydrostatic bearing rotary tables up to a diameter of 500mm.

Centring and Levelling Stages

Software guided centring and levelling platens with a maximum load carrying capacity of 300kgs.

IntelliProbe Corrects For Extreme Setup Errors

Software algorithms address profile distortion due to part misalignment, “intelligent probing” corrects for part off-centring errors of up to 2% of the part radius with negligible error.

Distribute Results Easily

Inspection Templates and Inspection Data Files are easily distributed via email for analysis using the free downloadable viewer or via PDF generated reports and CSV files.

Unlimited Number of Surfaces

2 surfaces can be measured simultaneously with the total number of surfaces that can be measured unlimited.

Shop Floor Compatible

GeoInspec has been specifically designed for shop floor use and employs B89.3.1 Standard – Profile Filtering to remove all background interference.

Probe Types

GeoInspec can be supplied with probes to best suit your application and can include LVDT, Half Bridge, Laser, Wireless Laser and Capacitance.

Sub-Micron Performance

GeoInspec offers extremely high levels of accuracy boasting sub-micron measurements and repeatability.

Reduces Inspection Time by up to 90%

GeoInspec’s ability to measure 1,000 data points on up to 2 surfaces simultaneously per revolution will significantly reduce your process times compared with other available methods.

GeoInspec Inspection Procedure

Complete Your Inspection Process In 3 Easy Steps

Step 1    Select an Inspection Template and Assign color-coded probes to surfaces.

Step 2    Start inspection

Step 3    View results, Print Report or Save As PDF file, Save results in Geometry Data File

GeoInspec’s features have been designed to help you get the job done.

Fast and Simple

The simple and intuitive full-featured Windows software enables any operator to quickly and easily inspect the type of complicated parts normally associated with gas turbines, break disc and roller bearing elements.

Programming Can Be Done Off-Line, On The Fly, Or Both

Inspection templates can be generated at the machine using AccuScan™, independently on any PC anywhere in the world using AccuScan IFE™ or a combination of both.

Out-Of-Tolerance Flagging

Out-Of-Tolerance Flagging quickly identifies to the operator non-conforming parts.

Integrated Help

Clicking the Help button located in the top right hand corner of any screen gives the operator instant access to the comprehensive user’s instruction.

Internal Probe Calibration

Probe calibration is accomplished using the Probe Calibration Wizard, which is accessed via the Tools menu. The calibration is a multi-step process, and instructions are displayed at each step.

Rigid Column Units

Column Units provide a rigid platform on which to mount the measuring probes and can be manoeuvred by counter-balance arms and locked at any position via a mechanical clamping system.

Results Are Recalculated Dynamically

Raw inspection data is collected and stored so datum’s, surface definitions and measurement units can be changed at any time with results being recalculated dynamically.